Kennametal
Kennametal

Come and see TopSolid 7, the first PDM based CAD/CAM solution LIVE in action at IMTS 2016, Chicago, September 12-16,

DMG MORI
Come and see TopSolid 7, the first PDM based CAD/CAM solution LIVE in action at IMTS 2016, Chicago, September 12-16,

Missler Software

Milling Titanium Ti6Al-4V with 8 cutting edges per insert!

Up to 8 cutting edges per insert. That’s helical milling at the lowest possible cost-per-edge. HARVI Ultra 8X helical milling cutters are designed to deliver the highest metal removal rates (MRR), especially in high-temperature alloys (Titanium).

Come and see TopSolid 7, the first PDM based CAD/CAM solution LIVE in action at IMTS 2016, Chicago, September 12-16,

The French software publisher Missler Software has recently launched the new version 7.10 of its TopSolid’Cam CAD/CAM software. The performance of the software has continued to improve since the latest generation of TopSolid was released, reducing average production times by 30% to 40%. 

Discover the strengths of TopSolid’Cam 7.10: 

Drill deep holes thanks to the advanced control of intersections 

The advanced control of drill hole intersections has been added to TopSolid in order to make the most of the new deep drilling tools, which are highly efficient, but very fragile. This process is optimally mastered by combining the control of peck drilling operations. 

Perform your multi-axis drilling in a single operation 

Thanks to five-axis analysis, without having to create a WCS, and access to all the contouring and pocketing cycles, users can program in record-breaking time. A high number of drill holes can easily be managed in a single operation, with multi-position geometries. 

Speed up production with VoluMill roughs 

Missler Software decided to increase the level of integration of VoluMill drilling strategies, in order to offer its customers the very best in modern path calculation algorithms. The rough is now available in TopSolid, as well as 2D machining operations. The VoluMill paths, which are based on an aim of always producing a constant volume of chips, will change your habits. As a consequence, a deep axial depth can be used (with a limited radial depth), the feed rate speeds can be increased significantly, while doing away with vibrations and conserving the lifespan of the tool and the machine axes. 

Simplify and secure the selection of driven points 

From a tool that is inclined on a turret, to the control of heads that can be inclined, the new control function for driven points makes it easier and safer to select driven points in a particularly user-friendly and efficient way.

Enquire about this StoryReturn to News Overviews
CGTech VERICUT
Rainford Precision
Mitsuiseiki.com
The Reshoring Initiative
XYZ Machine Tools
Lantek Sheet Metal Solutions
The Manufacturers Success Connection

Copyright © 2020 Machines4sale Ltd
All Rights Reserved

Machines4sale Ltd website uses cookies to ensure you get the best experience, as detailed in our Privacy policyAgree