Harvi Ultra 8X
Harvi Ultra 8X

WALTER HELICHECKS’ AUTOMATIC CLEANING AND LASER MARKING SPEEDS UP TOOL MANUFACTURING CYCLES

DMG MORI MonoBLOCK
WALTER HELICHECKS’ AUTOMATIC CLEANING AND LASER MARKING SPEEDS UP TOOL MANUFACTURING CYCLES

WALTER EWAG UK Ltd

Lantek Sheet Metal Solutions

WALTER HELICHECKS’ AUTOMATIC CLEANING AND LASER MARKING SPEEDS UP TOOL MANUFACTURING CYCLES

Tool inspection and manufacture has been made more efficient by the use of new cleaning and laser marking facilities on Walter’s Helicheck Plus and Helicheck Pro measuring machines’ robot loader system. The developments mean that users can save valuable time by concurrently cleaning and marking tools outside of the measuring area, while the robot loader automatically loads/unloads the measuring machine.


Tool inspection and manufacture has been made more efficient by the use of new cleaning and laser marking facilities on Walter’s Helicheck Plus and Helicheck Pro measuring machines’ robot loader system. The developments mean that users can save valuable time by concurrently cleaning and marking tools outside of the measuring area, while the robot loader automatically loads/unloads the measuring machine.


A clean tool is essential for a valid measurement, says United Grinding Group member Walter Ewag UK, which markets the Helicheck range (as well as the Helitronic series of tool grinders/eroders) in the UK. Now, with the new modules, tools are cleaned in an ultrasonic bath and subsequently dried in an air stream, which can be adapted to suit varying tool lengths. 


After cleaning then measuring, high-quality tool marking by laser is performed; marking (without penetration) can be on the tool shaft/end face with static or dynamic data.


For complete flexibility, the robot loader for these Helicheck models can be specified with either or both cleaning and/or laser marking, or the modules can be individually retrofitted to existing, appropriately-configured robot loaders.

, which markets the Helicheck range (as well as the Helitronic series of tool grinders/eroders) in the UK. Now, with the new modules, tools are cleaned in an ultrasonic bath and subsequently dried in an air stream, which can be adapted to suit varying tool lengths. 


After cleaning then measuring, high-quality tool marking by laser is performed; marking (without penetration) can be on the tool shaft/end face with static or dynamic data.


For complete flexibility, the robot loader for these Helicheck models can be specified with either or both cleaning and/or laser marking, or the modules can be individually retrofitted to existing, appropriately-configured robot loaders.


Enquire about this StoryReturn to News Overviews
XYZ Machine Tools
The Reshoring Initiative
Lantek Sheet Metal Solutions
CGTech VERICUT
Industrial Tooling Corporation
The Manufacturers Success Connection
Rainford Precision
Tungaloy

ForumCopyright © 2021 Machines4sale Ltd
All Rights Reserved

Machines4sale Ltd website uses cookies to ensure you get the best experience, as detailed in our Privacy policyAgree